For those who want to know how to test DSL Line, read on to find how it works.
In the recent internet market, wireless internet connection by all indications is more popular when compared to a DSL connection.
DSL functions by transferring information through a phone line using a fast frequency than other analog means. The outcome is a fast internet speed.
This is why the majority of people still prefer to make use of DSL and the chances, you’ll experience any form of signal interruption is very low.
Just like other forms of connection, it’s not void of errors. When you notice that you no longer get the speed you paid for, there is every tendency you want to test your DSL to find out why.
Table of Contents
How to test a DSL Line?
- Examine the settings of your modem using the IP in your modem’s manual. The majority ofDSL modems can test their lines inside the modem. With this, it’s possible to diagnose if the issue is with your modem or DSL Line.
- Make use of an online speed testing service like ‘SpeedTest’. If you’ve any problem getting online, SpeedTest can help you run a test and indicate the average speed you’re getting from your internet service provider.
- Reach out to your internet service provider, so their technical support team will help you and test your modem. They can help you check the speed, and if they discover anything negative about your connection, they can assist you to fix it at once.
- Consult the DSL report line for a quality test. This will enable you to know if you have a transmission problem or not. In other words, it checks for packet loss, ISP congestion, excessive latency. The system works by pinging you for different servers which will help access the transmission.
Identifying a bad DSL Line
Once there is a problem in the DSL connection, it might be an issue resulting from the phone company or the entire wiring of the house.
You can examine if there is an issue with your wiring by taking the time to inspect the notification lights directly on the DSL modem.
In addition, the distance between your server and your home also has an impact on the connection. For instance, there is a tendency to be a decline in the speed of your service from 24 Mbps to 2Mbps if the distance of your house to the server is like 3.1 miles.
Inspect the front
Ensure the front lights are on. This comprises power service, link light, and broadband lights. They need to remain active.
There should be no loose connections
Make sure the router, telephone jack, and DSL modem have no loose connection. Peradventure you intend to make any changes, ensure you unplug all the sources of power before you commence.
Insutall a filter
A filter should be installed between your telephone and phone line. For those without a telephone line, you don’t need to install a filter.
Cross-check to ensure you’ve phone service by always paying attention to a dial tone. In a situation, where you didn’t hear any dial tone, then it means you have a bad DSL Line.
Shut your computer down
You need to shut everything down; your computer, router, and other connected devices. Wait for 2-3 minutes then reconnect your device.
Check DSL Speed
This can be done by pressing the ‘Win-R’ keys >>> type ‘cmd’ in the text field >>> press ‘Enter’ to have access to ‘Command Line’.
Enter the username & password
Enter the IP address in your web browser, press ‘Enter’ type the username & password. This gives you access to the admin console.
The default login for both is normally admin but you can check the manual to identify the correct login details.
Go to the WAN
Navigate to ‘WAN >>> Status >>> Connection page. Take note of all the values listed there. If you discover that the attenuation indicates 20db or less, then your DSL Line is performing well. Any range that falls from 20-40db is good. If it’s higher then it’s bad wiring or connection.
In Conclusion
Once you’ve chosen DSL as your online method, you can carry out your broadband service via the phone wiring in your office or home without additional need for cabling or connection apart from a plug-in filter.
DSL may give you a slower connection when compared to other options like fiber optic service or cable broadband but the good thing is that it’s a thrifty alternative.
Frequently Asked Questions
How do I find out if my DSL cable is damaged?
Navigate to ‘WAN >>> Status >>> Connection page. Take note of all the values listed there. If you discover that the attenuation indicates 20db or less, then your DSL Line is performing well.
Any range that falls from 20-40db is good. If it’s higher then it’s bad wiring or connection.
Can I troubleshoot the DSL connection?
Yes, you can by Power-cycle of the DSL modem. To do this, Turn off the modem. Unplug all power cord, wait for 30 seconds before plugging it again.
This will make it to re-synchronize the DSL signal together with your computer’s network connection. This process alone can rectify most issues related to DSL.
Why is my DSL faulty?
Issues related to ISP or DSL can result in a faulty connection. It’s better to check if there is an issue with the wiring connection by checking the lights on the modem. Confirm if the phone cable is plugged directly into the wall socket.
